AAC D-1SE2 110 OHM AES/EBU Cable with Rhodium XLR
PREMIUM PERFORMANCE, AFFORDABLE PRICE
Audio Art’s D-1SE2 110 is a precision engineered, 110-ohm AES/EBU type balanced digital cable designed for accurate transmission of today’s high definition digital audio signals. This cable type is frequently used in sophisticated recording studios where the utmost in fidelity is desired to produce the most complete possible signal transference from A/D converter to digital tape. D-1SE2 100 brings this level of high-performance refinement home as a connection between CD transports and D/A converters in hi-fi residential systems as an alternative to the mre common S/PDIF 75 Ohm coaxial interface. Our design begins with silver coated Continuous Crystal Copper conductors to maintain a uniform 110-ohm impedance, and to minimize signal reflections. This significantly reduces data transmission anomalies such as jitter, which can cause myriad issues in your digital music’s fidelity. With full 100% shielding eliminating RF and EMI noise, a PTFE dielectric, and solid spacers to separate the conductors, D-1SE2 110 maintains a uniform 110-ohm impedance. Our custom shop, hand assembled aesthetic, plus audiophile quality, high-performance ETI BRIO XLR’s, expertly terminated with Cardas QuadEutectic silver solder, insure a beguiling musical performance.
EICHMANN TECHNOLOGIES BRIO XLR
The ETI Research Brio XLR was created using the same design philosophies as the Kryo XLR featured in our upline IC-3 e2 and Statement interconnect cables, but with rhodium plating instead of silver. With conductive elements made from tellurium copper, and a rhodium plating that will not tarnish, Brio XLR has long lasting durability factors. Brio XLR also offers a robust housing made from brass, designed for superior vibration damping and high EMI/RF noise rejection. Over the years, XLR connectors with some type of copper have been available but the male pins typically have too much mass which causes excessive capacitance, altering the sound. Many of these XLR’s also have female connectors which are brass formed leading to sibilance and grain being introduced to the music! ETI Brio XLR uses tellurium copper for all conductive elements, ensuring maximum fidelity, and an attention to performance enhancing detail that results in the best connector choice always having the least effect on sound.
THE CABLE AT THE CORE
D-1SE2 110 Ohm is a state-of-the-art, balanced digital cable with compromise design. Silver-coated pure copper conductors insure improved conductivity, and solid rod spacers between conductors maintain a constant 110 Ohm impedance. It is 100% shield covered, eliminating noise and interference. Uniform impedance is achieved by using a pure PTFE insulation held to a tolerance of .002 inch (.05 mm) thickness. The dielectric is extruded under pressure for maximum consistency, minimizing VSWR spikes, a cause of jitter in digital signal transmission.
| D-1SE2 | Statement Digital | |
|---|---|---|
| Solid, Silver-Coated OFC Center Conductor | ||
| Closed Cell Foam FEP dielectric | ||
| Aluminum Mylar and Heavy Braid Dual Layer Shield | ||
| Single Crystal (OCC) Pure Silver Center Conductor | ||
| Dual Copper Mylar / Braided Silver-Plated OFC Shield | ||
| Woven Techflex Jacket | ||
| High Performance ETI LINK Gold and Silver RCA's and Furutech BNC's | ||
| Audiophile Quality WBT nextgen™ RCA's and Oyaide BNC's | ||
| Audiophile Grade Cardas Quad Eutectic Silver Solder | ||
| Custom Shop Assembly by Phil Martinez |
