Metrum Amethyst
2 In stock
Entry level NOS DAC using 1 DAC TWO or DAC THREE transient module per channel.
Analog volume control with amplification for headphones!
Voltage: 120V
The AMETHYST is our entry model NOS DAC using our praised forward correction technology. As a result music will be more exciting as details on very low levels will be audible. The AMETHYST can meet the best systems today in terms of sound quality as it borrows all the good things from our top models. In addition we have implemented a powerful headphone amplifier with volume control. The AMETHYST is using two Transient R2R ladder DAC TWO / DAC THREE modules. This results is an extremely fast and accurate impulse behavior and brings your listening experience on a much higher level. Despite the fact that both DAC TWO / DAC THREE modules are present on the same board, a high channel separation of 110 dB is realized. This contributes to flawless positioning of instruments.
The built-in headphone amplifier gets its power from a powerful 30VA toroidal power supply and is capable of driving impedances down to 16 Ohms. When the AMETHYST is used as a DAC this power will be available for the DAC only. Even though the AMETHYST is a ‘mini’ integrated design, incorporating both digital and analogue circuitry, the noise floor is extremely low (-145dB @ 2V RMS). These low noise figures indicate how the fine detail retrieval Metrum is known for is made possible.
The RCA outputs have a fixed level of 2V @ 0dBFS, so the AMETHYST can be used as a stand-alone DAC. When headphones are connected the RCA outputs are muted and volume control becomes active. When disconnected, the RCA outputs become active again with the volume control disabled.
Digital To Analog Converter Type: Non Oversampling
Audio Bit Depth (Resolution): 24
Correction Type: Forward (FPGA) corrected
Metrum DACTWO Transient chips per channel: 1
Noise Floor: -145 dB
Output Impedance: RCA 100 Ohm, Headphone connection 0.001 Ohms
Outputs: 1x 6.35mm jack on the front, 2x RCA on the back (stereo)
Inputs: 1x Optical, 2x Coax, 1x USB
Total Harmonic Distortion: 0.006% THD
Sampling rate Optical: 44.1 - 96 kHz
Sampling rate Coax and AES/EBU: Coax: 44.1 -192 kHz
Sampling rate USB: 44.1 - 384 kHz
Products Dimensions: 240 x 190 x 70 mm
Product Weight: 2,5KG
Remote controller: No
